Castle Creations CC Blower for Monster 1/8 Systems

Wire length: 9. 5". 49mm x 44. 5mm x 44. 5mm. Drops motor temperature as much as 30° F. Castle creations cc blower 1/8: all 15 series, cse011000400 fits motors with outside diameter between 1-1/2 and 1-7/8", 38 - 47mm. One year limited warranty through manufacturer beginning at date of purchase.

---

RPM Esc Cage for Castle X, Mamba Monster 2 and Traxxas MXL Replacement Parts, Black

With the stock traxxas esc, there’s no solid mount available when you need to remove the ESC fan, like when you’re running in the wet or in the snow. Replaces weaker stock components, check for full parts compatibility. Simply remove two screws, unhook the fan, reinstall those two screws and you’re off; with the solid assurance RPM’s Cage is still holding tight to that valuable Castle ESC.

. While our esc cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only – E-Maxx, E-Revo and Summit. Each rpm esc cage is manufactured from our ridiculously tough blend of engineering grade nylons for a lifetime of worry-free performance.

Each cage is molded in black and backed by our limited lifetime warranty against breakage. Fits the traxxas E-Maxx, E-Revo and Summit. That’s not a problem with the RPM ESC Cage. Furthermore, we left air channels along both sides of the ESC to allow air movement along the sides of the case, helping to keep the ESC cool.

Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles. Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. We include a separate on / off switch mount that bolts directly to our cage in one of two locations for extra versatility.




Similar products

---

Traxxas 5626 ESC Hold-Down Bracket

It is constructed of durable nylon composites and includes mounting screws and foam pad. Designed to increase durability. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Durable black-nylon composite construction. This is a replacement ESC hold-down for the MXL-6s ESC.

Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. Made by rpm r/c products, a United States based company where resources are sourced from American producers. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance.

This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Includes mounting screws and foam pad. Hold-down bracket for MXL-6s ESC. Fits the traxxas E-Maxx, E-Revo and Summit. Replaces weaker stock components, check for full parts compatibility.


Similar products

---

Castle Creations 011-0019-00 Blower Fan Shroud for Neu-Castle 20 Series Motor Packaged

Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. Durable black-nylon composite construction. Includes mounting screws and foam pad. Castle creations cc blower 1/5: all 20 series Motors, CSE011001900 Designed to increase durability. The cc blower for neu-castle 20 Series motors plugs directly into your receiver for power.

Fits the traxxas E-Maxx, E-Revo and Summit. Replaces weaker stock components, check for full parts compatibility. Includes, fans, shroud and two 2 black zip ties. Can drop motor temperatures as much as 30 degrees! . Made by rpm r/c products, a United States based company where resources are sourced from American producers.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Hold-down bracket for MXL-6s ESC. Includes, shroud, fans, and two 2 black zip ties. Must have for any hardcore basher.


Similar products

---

Traxxas 5472 Wheelie Bar

Includes mounting hardware and instructions. Durable black-nylon composite construction. Four snap-in adjustment positions allow you to choose how extreme you want your wheelie action to be. When it is time to head off-road, a convenient quick release tab makes removal and installation a snap. Fits all 1/10 Revos, nitro or electric.

Quick and easy removal for off-road adventures. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. The cc blower for neu-castle 20 Series motors plugs directly into your receiver for power. Hold-down bracket for MXL-6s ESC. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Adjustable wheelie bar has four separate adjustments positions to control wheelie height. Made by rpm r/c products, a United States based company where resources are sourced from American producers. The accessory revo wheelie bar assembly features a unique quick release design that is compatible with Revo trucks, nitro and electric.

Can drop motor temperatures as much as 30 degrees! . The wheelie bar mount is compatible with all factory Revo configurations, including sway bars and wing mounts.


Similar products

---

Traxxas 5632 Rear Chassis Brace 1/10 Summit, E-Revo

What's in the box chassis brace; mounting screws 3 Designed to increase durability. Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. Installs in minutes. Durable black-nylon composite construction. Includes mounting screws. Made by rpm r/c products, a United States based company where resources are sourced from American producers.

Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Brilliant blue-anodized aluminum. Fits the traxxas E-Maxx, E-Revo and Summit. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Includes mounting screws and foam pad.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Can drop motor temperatures as much as 30 degrees! Fits 1/10 scale E-Revo and Summit. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Fits all 1/10 Revos, nitro or electric.

Adjustable wheelie bar has four separate adjustments positions to control wheelie height.


Similar products

---

Traxxas 34-T Pinion Gear 1.0 metric pitch and 20 Degree Pressure Angle fits 5mm shaft

Made by rpm r/c products, a United States based company where resources are sourced from American producers. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Includes mounting screws. Larger gears will result in higher speeds while smaller gears provide more torque.

Hold-down bracket for MXL-6s ESC. Durable black-nylon composite construction. These are designed for use with 1. 0 metric pitch spur gears and 5mm motor shafts. Part. Includes, shroud, fans, and two 2 black zip ties. Must have for any hardcore basher. Optional traxxas pinion gears allow you to increase or decrease the final drive ratio and tune for different applications.

Brilliant blue-anodized aluminum. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Quick and easy removal for off-road adventures. Gear, 34-t pinion 1. 0 metric pitch, 20° pressure angle / set screw. Strengthens rear chassis for massive jumps.


Similar products

---

Castle Creations Sidewinder 8th Esc and Motor Combo

If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Designed to increase durability. Includes, fans, shroud and two 2 black zip ties. This is an O. E. M. This combo provides all the power and muscle that Castle is known for at an exceptional price point.

. This system is designed for use in R/C vehicles weighing 11 lbs or less, with batteries and ready to run. Brilliant blue-anodized aluminum. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. We think you’ll like utilizing stronger servos, because this means powering up your torque or increasing steering response! The ESC has a potted design and will tolerate wet conditions without flinching, so pound on snow filled parking lots and beat the muddy trails into submission, this system is ready for the challenge.

Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. It sports high quality components resulting in a highly efficient motor, ready to give hardcore R/C enthusiasts the Castle advantage. The sidewinder 8th is castle’s latest indulgence in affordable power upgrades for 1:10th scale Monster Trucks and 1/8th scale buggies, truggies and onroad vehicles.

Can drop motor temperatures as much as 30 degrees! Made by rpm r/c products, a United States based company where resources are sourced from American producers.


Similar products

---

Traxxas 5451R Revo/Maxx Steel CV Driveshafts Assembled with Boots

Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. These are simply the most advanced steel CV driveshafts available. Fits 1/10 scale E-Revo and Summit. Adjustable wheelie bar has four separate adjustments positions to control wheelie height. Durable black-nylon composite construction.

Designed to increase durability. Fits all 1/10 Revos, nitro or electric. Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Includes, fans, shroud and two 2 black zip ties.

Complete set of four shafts; pre-assembled; includes screw pins and wheel nuts. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. T-maxx models #4902, 4908, 4909, Revo 3.3 models #5308, 5309, e-revo model #5605 and E-Maxx model #3905 only. Includes mounting screws.

Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Quick and easy removal for off-road adventures.


Similar products

---

Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit

Replaces weaker stock components, check for full parts compatibility. This is the 5352r h/d rebuild Kit Revo/Maxx Trucks from Traxxas. Can drop motor temperatures as much as 30 degrees! Includes, fans, shroud and two 2 black zip ties. Includes, shroud, fans, and two 2 black zip ties. Must have for any hardcore basher.

Fits the traxxas E-Maxx, E-Revo and Summit. This is for use on rc vehicles such as the Traxxas Revo; consult your user's manual for exact parts listings. Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Battery connector required for use, Castle 6. 5mm connectors are recommended. Part. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Adjustable wheelie bar has four separate adjustments positions to control wheelie height.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. This product is made from high quality materials and designed for lasting performance.


Similar products

---

Duratrax Lockup 1:8 Scale RC Buggy Tires with Foam Inserts, C2 Soft Compound, Mounted on Black Wheels Set of 2

Brilliant blue-anodized aluminum. Replaces weaker stock components, check for full parts compatibility. Includes mounting hardware and instructions. Battery connector required for use, Castle 6. 5mm connectors are recommended. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.

Designed for use with 1. 0 metric pitch spur gears and 5mm motor shafts. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Specs: diameter: 4. 2 107mm width: 1. 8 45mm hex size: 17mm. The cc blower for neu-castle 20 Series motors plugs directly into your receiver for power.

Adjustable wheelie bar has four separate adjustments positions to control wheelie height. Works with the traxxas mxl-6s esc #3377, works with castle Mamba Monster 2 and Mamba Monster x. Designed to increase durability. This is for use on rc vehicles such as the Traxxas Revo; consult your user's manual for exact parts listings.

. Complete set of four shafts; pre-assembled; includes screw pins and wheel nuts.


Similar products