Evolution Power Tools RAGE 3-DB 10-Inch TCT Multipurpose Cutting Double Bevel Compound Sliding Miter Saw

Extra large base for cutting stability. With the double bevel facility, the need to re-adjust the work piece is significantly reduced. 1 inch Blade Arbor. No coolant required and produces virtually no sparks. Extendable fence guard for long work-pieces. Evolution rage 3-db, multipurpose double bevel compound Sliding Miter Saw is capable of cutting steel, TCT, 10-Inch, aluminum, wood with nails in and plastic with just one blade.

The rage 3-db includes a 12-5/8-inch slide for long-angled cuts, a large base for extra cutting stability and laser guidance for optimum accuracy. 10 inch multipurpose blade rage255blaDE produces up to 750 cuts per blade in 2-Inch mild steel box section.

---

Evolution Power Tools 10BLADEST Steel Cutting Saw Blade, 10-Inch x 52-Tooth

Designed for cutting mild steel, Evolution metal cutting blades use dry cut technology, cutting with very little heat and few burrs. Max rpm 30001-inch arbor size, -note: designed for use with Evolution saws or other low RPM saws. 52 carbide teeth,. 078-inch Kerf.


Similar products

---

Evolution Power Tools EVOMS1 Compact Folding Miter Saw Stand with Quick Release Mounting Brackets, Rollers, and End Stops, Black

Quick release brackets: quick release mounting brackets allow for fast miter saw removal. Setup and take down of the miter stand is quick and easy. 52 carbide teeth,. 078-inch Kerf. Fits all evolution power Tool's Miter Saws, as well as most other brands of miter saws. This miter saw stand is both lightweight and robust.

Max rpm 3000 The stand weighs just 34lb and can support long workpieces, up to 118in, in length and can support up to 330lb. 1-inch arbor size, -note: designed for use with Evolution saws or other low RPM saws. Quick & easy set up: the folding legs, allow for simple set up, quick release mounting brackets and support arms that slide into the stand, storage and transport.

Sturdy & robust: this miter saw stand can support long workpieces up to 118 inches in length and has a maximum work load of 330lbs. Fits all evolution power tool's miter saws, as well as most other brands of miter saws. It is equipped with quick release mounting brackets for fast saw removal and height adjustable arms, with rollers and end stops.

The folding legs and support arms that slide into the stand, allow for simple storage and transportation. Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts. Perfectly complementing Evolution’s miter saws, as well as most other brands of miter saw.


Similar products

---

Oshlun SBF-100052 10-Inch 52 Tooth TCG Saw Blade with 1-Inch Arbor 5/8-Inch Bushing for Mild Steel and Ferrous Metals

Fits all evolution power tool's miter saws, as well as most other brands of miter saws. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials.

Max rpm 3000 Proper clamping devices should be employed. Never use on saws that run above the rated Max RPM. 52 carbide teeth,. 078-inch Kerf. 1-inch arbor size, -note: designed for use with Evolution saws or other low RPM saws. Quick & easy set up: the folding legs, quick release mounting brackets and support arms that slide into the stand, allow for simple set up, storage and transport.

Sturdy & robust: this miter saw stand can support long workpieces up to 118 inches in length and has a maximum work load of 330lbs. Quick release brackets: quick release mounting brackets allow for fast miter saw removal. Max rpm: 5, 200 Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts.

They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. Professional grade C-6 carbide.


Similar products

---

Evolution Power Tools 10BLADEWD 10-Inch Wood Cutting Blade with 1-Inch Arbor

Fits all evolution power tool's miter saws, as well as most other brands of miter saws. Triple chip tooth grind. Laser cut expansion slots. 40 teeth. Quick release brackets: quick release mounting brackets allow for fast miter saw removal. Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts.

. Max rpm 5200 Fits: evolution Rage3 and miter saws. 1-inch arbor size, -note: designed for use with Evolution saws or other low RPM saws. Quick & easy set up: the folding legs, quick release mounting brackets and support arms that slide into the stand, allow for simple set up, storage and transport. Sturdy & robust: this miter saw stand can support long workpieces up to 118 inches in length and has a maximum work load of 330lbs.

Max rpm 300010-inch Diameter. 1-inch Arbor. 52 carbide teeth,. 078-inch Kerf. Professional grade C-6 carbide. Max rpm: 5, 200


Similar products

---

Evolution Power Tools 10BLADEAL Aluminum Blade, 10"

Max rpm: 5, 200 Max rpm 3000 . Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts. 1-inch Arbor. 10-inch Diameter. Triple chip tooth grind. 40 teeth. Produce virtually no heat, burrs or sparks. Cut faster than traditional abrasive blade methods. Note: designed for use with Evolution saws or other low RPM saws.

Cut longer than abrasive blades. Professional grade C-6 carbide. Fits: evolution Rage3 and miter saws. Material applications include: grating, pipe and tube, extrusions. Material applications include grating, pipe and tube, extrusions. 1-inch arbor size, -note: designed for use with Evolution saws or other low RPM saws.

Quick & easy set up: the folding legs, allow for simple set up, quick release mounting brackets and support arms that slide into the stand, storage and transport. Sturdy & robust: this miter saw stand can support long workpieces up to 118 inches in length and has a maximum work load of 330lbs. Fits all evolution power tool's miter saws, as well as most other brands of miter saws.

Max rpm 5200 Designed for use with Evolution saws or other low RPM saws.


Similar products

---

Evolution Saw Blades For Aluminum - 10 Inch Circular Saw Blade 10BLADEAL

Fits all evolution power tool's miter saws, as well as most other brands of miter saws. Material applications include: grating, pipe and tube, extrusions. Evolution industrial cold Cut Cutting Blades utilize premium features to be better than your average saw blade. Cuts aluminum and other non-ferrous metals without heat, burrs or coolant.

Virtually No Sparks. Triple chip tooth grind. Unless you can adjust the rpm, never put a cold cut saw blade in a saw that is rated to use abrasive saw blades as the vibration from the higher RPM can damage or destroy the cold cut saw blade. Max rpm 5200 Produce virtually no heat, burrs or sparks. Fits: evolution Rage3 and miter saws.

Laser cut expansion slots. Professional grade C-6 carbide. They can last as long as 20 or more abrasive blades of the same type. Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts. Quick release brackets: quick release mounting brackets allow for fast miter saw removal.

These saw blades are rated for cutting Mild Steel materials such as square tube, tube, angle iron, mild steel plate, pipe, and other ferrous metals. Caution: abrasive saws and cold cut saws operate at different speeds respective to the blade type being used.


Similar products

---

Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw

Cuts aluminum and other non-ferrous metals without heat, burrs or coolant. Virtually No Sparks. The evosaw380 cold cutting chop saw outperforms abrasives, cutting faster, with blades lasting 20x's longer. Cold cut saw; cuts metal with minimal heat and burrs, leaving a workable finish. Designed for use with Evolution saws or other low RPM saws.

Laser cut expansion slots. The evosaw380 is an upgraded version of the Steelsaw2, which has been discontinued. These saw blades are rated for cutting Mild Steel materials such as square tube, tube, angle iron, pipe, mild steel plate, and other ferrous metals. Caution: abrasive saws and cold cut saws operate at different speeds respective to the blade type being used.

Unless you can adjust the rpm, never put a cold cut saw blade in a saw that is rated to use abrasive saw blades as the vibration from the higher RPM can damage or destroy the cold cut saw blade. Dry metal cutting chop saw; cuts metal with minimal heat or sparks and doesn't require coolant. Triple chip tooth grind.

Creates an Instantly Workable Finish. This machine cuts steel with virtually No heat, burrs, or sparks. It is ideal for cutting steel plate, pipe, angle iron, square tube, tube and metal roofing.1800 watt / 15 amp motor with high torque gearbox; reduces motor load and improves steel cutting performance.


Similar products

---

Evolution Power Tools 14BLADEST Steel Cutting Saw Blade, 14-Inch x 66-Tooth

Quick release brackets: quick release mounting brackets allow for fast miter saw removal. These saw blades are rated for cutting Mild Steel materials such as square tube, tube, angle iron, mild steel plate, pipe, and other ferrous metals. Caution: abrasive saws and cold cut saws operate at different speeds respective to the blade type being used.

Laser cut expansion slots. Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts. Max rpm 5200 Unless you can adjust the rpm, never put a cold cut saw blade in a saw that is rated to use abrasive saw blades as the vibration from the higher RPM can damage or destroy the cold cut saw blade.

Dry metal cutting chop saw; cuts metal with minimal heat or sparks and doesn't require coolant. 1800 watt / 15 amp motor with high torque gearbox; reduces motor load and improves steel cutting performance. Cold cut saw blades use a significantly lower RPM than abrasive saw blades. Cold cut saw; cuts metal with minimal heat and burrs, leaving a workable finish.

40 teeth. 66 carbide teeth,. 094-inch Kerf. 1-inch Arbor.


Similar products

---

HEAVY DUTY 5/8" 16mm Magnetic Drill Chuck with 3/4" Weldon Shank Adapter

10-inch Diameter. Cut faster than traditional abrasive blade methods. Note: designed for use with Evolution saws or other low RPM saws. Cut longer than abrasive blades. Produce virtually no heat, burrs or sparks. Cold cut saw; cuts metal with minimal heat and burrs, leaving a workable finish. Max rpm 5200 Unless you can adjust the rpm, never put a cold cut saw blade in a saw that is rated to use abrasive saw blades as the vibration from the higher RPM can damage or destroy the cold cut saw blade.

Dry metal cutting chop saw; cuts metal with minimal heat or sparks and doesn't require coolant. Comes with Chuck Key and adapter. Outperforms abrasive saws; faster cutting & long blade life averages 1000 cuts in 2 in x 2 in mild steel. Fits: evolution Rage3 and miter saws. Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts.

1800 watt / 15 amp motor with high torque gearbox; reduces motor load and improves steel cutting performance. New heavy duty 5/8" 16mm magnetic drill chuck with 3/4" weldon shank adapter This is a new HEAVY DUTY chuck primarily used with Magnetic Drills for easy change to Standard Twist Drilling. Designed to increase performance.

Note: designed for use with Evolution saws or other low RPM saws.


Similar products

---

IRWIN Tools Metal-Cutting Circular Saw Blade, 10-inch, 80T 4935561

Fits: evolution Rage3 and miter saws. 40 teeth. The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower. Triple chip tooth grind. 3/4" weldon shank adapter the jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank. 66 carbide teeth,. 094-inch Kerf.

Designed to increase performance. Note: designed for use with Evolution saws or other low RPM saws. 1600 rpm. 1-inch Arbor Size. Material applications include: grating, pipe and tube, extrusions. The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower. Cut faster than traditional abrasive blade methods.

Note: designed for use with Evolution saws or other low RPM saws. Cut longer than abrasive blades. Outperforms abrasive saws; faster cutting & long blade life averages 1000 cuts in 2 in x 2 in mild steel. 52 carbide teeth,. 078-inch Kerf. Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques.




Similar products