Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1/4 Pint Brush

Remains pliable in cold temperatures, working range is -100 degrees to 600 degrees fahrenheit. Use on threaded brass, black pipe, aluminum, PVC nylon and galvanized pipe threads, polyethylene, stainless steel, polypropylene, polybutylene, tin, ABS, copper, hoses and more. Not for use on oxygen systems. Non-hardening, non-toxic paste with PTFE.

. Provides a positive seal on pipe thread, housings, compressors, motors, fittings, hydraulics, plugs, LPG cylinders, oil burners, pump assemblies, hoses, nozzles, joints, engines, fuel lines, couplings and more. Pressure range is 10, 000 psi when sealing liquids and 3, 000 psi when sealing gases. Premium pipe thread sealant with PTFE.

Excellent resistance to gasoline, lpg, diesel oil, propane, acids, butane, cutting oils, potable water, kerosene, steam, aliphatic solvents, up to 20 percent alcohol and petroleum blends, ammonia, petroleum solvents, compressed air and more.

Gasoila Yellow PTFE High Density Thred Tape Roll, -450 to 550 Degree F Performance Temperature, 3.8 mil Thick, 260" Length, 1/2" Width, For Gas

Use on all types of pipe. Non-toxic. Designed for chemical installations and sealing lines carrying natural gas, propane, butane and oil. Gasoila 1/2 inch x 260 inch for gas High Density Yellow PTFE Specialty Series Thred Tape. Temperature range -450 to 500 degree Fahrenheit. Density is 1. 3 - 1. 45 gram per cubic centimeter.

Pressure range up to 10000 PSI. Thickness is 3. 8 milli-inches. Use on all types of pipe. Meets mil spec mil - aA-58092. Tensile minimum PSI - 1600 .


Similar products

Homewerks VGV-1LH-B3B Premium Gas Ball Valve, Female Thread x Female Thread, Brass, 1/2-Inch
HomeFlex 11-TC-02125 Corrugated Stainless Steel Tubing Cutter, 0.2-Inch - 1.25-Inch
HomeFlex 11-436-005 1/2-Inch Brass Corrugated Stainless Steel Tubing x MIPT Male Adapter
HomeFlex 11-464-005 1/2-Inch Brass Corrugated Stainless Steel Tubing x MIPT Termination Flange
Camco 10324 Gas Leak Detector with Sprayer - 8 oz
Gasoila PT80-24 Pink PTFE High Density Thred Tape Roll, -450 to 550 Degree F Performance Temperature, 3.7 mil Thick, 260" Length, 1/2" Width, Thread tape for Water H2O
Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
HomeFlex 11-00575 1/2-Inch x 75-Feet Corrugated Tubing, Stainless Steel
HomeFlex 11-436-007 3/4-Inch Brass Corrugated Stainless Steel Tubing x MIPT Male Adapter
HomeFlex 11-00775 3/4-Inch x 75-Feet Corrugated Tubing, Stainless Steel


OPW 11BP-0400 3/4" NPT Gasoline Nozzle, 11BP, Black

The opw 11bp will not open until the pumping system is pressurized, and closes automatically when the pressure is removed. From the manufacturer the opw 11 Series automatic nozzles are OPW's premium conventional nozzles for safe retail and commercial petroleum filling. Thickness is 3. 8 milli-inches. Prevents gasoline spills in prepay or card lock systems utilizing OPW's unique No Pressure -No Flow Device.

Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology. Density is 1. 3 - 1. 45 gram per cubic centimeter. Durable lever guard that won't scratch your customers' vehicles. Tensile minimum PSI - 1600 Meets mil spec mil - aA-58092. Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions.

Use on all types of pipe. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. The opw 11bp series is designed for use in retail and commercial filling applications including prepay, self and full-service, credit/debit card readers or card-lock systems to help prevent gasoline spills.

.


Similar products

Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
OPW 45-5060 Swivel MF, 3/4"
OPW 11B-0100 Nozzle 3/4 - Green
OPW 66V-0300 Breakaway Valve with 300# shear pins, 3/4"
OPW 66REC-1000 Breakaway Reconnectable, 3/4"
OPW7HB-0100 Diesel Nozzle, 1", Green
OPW 68EZR-7575 3/4" Reconnectable Breakaway
Husky 000350 3/4" Male NPTF x 3/4" Female NPTF Multi-Plane Swivel, 19mm Male x 19mm Female
Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose
OPW 45-5075 M x F Two Plane Hose Swivel, 1" x 1"


OPW 45-5060 Swivel MF, 3/4"

Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. 50 psi 3. 45 bar maximum pressure. Thickness is 3. 8 milli-inches. Better flow performance - less restriction means higher refueling speeds. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. Durable lever guard that won't scratch your customers' vehicles.

Unique two planes of rotation for easy nozzle positioning and hose life. Use on all types of pipe. Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology. Density is 1. 3 - 1. 45 gram per cubic centimeter. The 45 is installed between the nozzle and hose to reduce strain, providing flexibility so fueling hoses last longer.

Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions. Tensile minimum PSI - 1600 Meets mil spec mil - aA-58092. Prevents gasoline spills in prepay or card lock systems utilizing OPW's unique No Pressure -No Flow Device.

The opw 45 swivel is designed for gasoline self-service applications where easy nozzle and hose handling is important for customer convenience.


Similar products

OPW 11BP-0400 3/4" NPT Gasoline Nozzle, 11BP, Black
Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
OPW 66V-0300 Breakaway Valve with 300# shear pins, 3/4"
Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose
OPW 11B-0100 Nozzle 3/4 - Green
OPW 45-5075 M x F Two Plane Hose Swivel, 1" x 1"
Husky 159404N-04 New X Unleaded Nozzle with Three Notch Hold Open Clip and Full Grip Guard
OPW 11B-0100 3/4 Inch Nozzle 4 Pack- Green
OPW 66REC-1000 Breakaway Reconnectable, 3/4"
OPW7HB-0100 Diesel Nozzle, 1", Green


Gasoila E-Seal Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1/4 Pint Brush

Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions. Durable lever guard that won't scratch your customers' vehicles.

Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology. Better flow performance - less restriction means higher refueling speeds. Non-hardening, opaque, non-toxic, dark green paste. Not for use with oxygen. Excellent resistance to gasoline, butane, acids, diesel oil, potable water, kerosene, steam, LPG, aliphatic solvents, up to 20 percent alcohol and petroleum blends, ammonia, propane, cutting oils, petroleum solvents, compressed air and more.

Meets ul standards for use with ethanol blended gasoline. Seals up to 10, 000 psi for liquids and up to 3, 000 psi for gases. Withstands temperatures from -100 degrees F to +600 degrees F -74 to +318 degrees C. Use on all types of pipe. Meets mil spec mil - aA-58092. Pressure range: 10000 psi sealing liquids and 3000 PSI sealing gases.




Similar products

Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
Gasoila Yellow PTFE High Density Thred Tape Roll, -450 to 550 Degree F Performance Temperature, 3.8 mil Thick, 520" Length, 1/2" Width, For Gas
Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose
Gasoila PLS2 Premium Pipe Thread and Gasket Sealer, -100 to 600 Degree F, 1/4 Pint Brush
Permatex 80019 Aviation Form-A-Gasket No. 3 Sealant, 4 oz.
Gasoila Hard-Set Red Varnish Thread Sealant, -60 to 350 Degree F, 1/4 pint Can
Dewhel fuel pump mount mounting bracket clamp cradle For BOSCH 044 Black
Holley 26-147 Fuel Tester
Apache 99000233 3/4" Fuel Swivel
Gasoila AP02 All Purpose Water Finding Paste, 2 oz Tube


Gasoila Hard-Set Red Varnish Thread Sealant, -60 to 350 Degree F, 1/4 pint Can

Hard-setting, fast-drying, red varnish sealant. 50 psi 3. 45 bar maximum pressure. Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology. Dries to touch within 30 minutes; thorough drying may take 24 to 48 hours. Not for use on alcohol content over 20 percent. Temperature range: -100 degree Fahrenheit to 800 degree Fahrenheit.

Unique two planes of rotation for easy nozzle positioning and hose life. Density is 1. 3 - 1. 45 gram per cubic centimeter. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. Tensile minimum PSI - 1600 Withstands temperatures from -100 degrees F to +600 degrees F -74 to +318 degrees C.

Meets ul standards for use with ethanol blended gasoline. Not for use on alcohol content over 20 percent. Not for use on oxygen. Thickness is 3. 8 milli-inches.


Similar products

Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
Gasoila PLS2 Premium Pipe Thread and Gasket Sealer, -100 to 600 Degree F, 1/4 Pint Brush
Gasoila E-Seal Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1/4 Pint Brush
Cambridge Zipits Cable Ties 11" 75 Lbs 1000 Pcs, Standard Duty, UV Black
Fastronix Heavy Duty Push Button Momentary Start Switch (Neoprene Cap)
Scotch Magic Tape, Standard Width, Engineered for Mending, Cuts Cleanly, 3/4 x 1000 Inches, Boxed, 10 Rolls (810K10)
Enegitech 12 Pack CR2 3V 800mAh Lithium Photo Battery with PTC Protection DL-CR2 for Golf Rangefinder - Baby Monitor - Flashlight


Husky 159404N-04 New X Unleaded Nozzle with Three Notch Hold Open Clip and Full Grip Guard

Stream shaper reduces turbulence for straighter fuel flow and less splash back spillage. Pressure range: 10000 psi sealing liquids and 3000 PSI sealing gases. Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions.

Husky's product line features equipment for vapor recovery, conventional fueling, truck and high volume, farm and commercial and convenience store applications. Aluminum reinforced spoutbushing keeps spout tip round and acts as a captive fastener to prevent tip end sensor damage. Density is 1. 3 - 1. 45 gram per cubic centimeter.

Equipped with a unique flow-Stop device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. Aluminum reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip end sensor damage. The husky 159404-04 new x unleaded nozzle with three notch Hold Open Clip and Full Grip Guard comes with a 1-year limited warranty that protects against defects in materials and workmanship.

Husky corporation produces high-quality nozzles, swivels, Safe-T-Breaks and accessories for service station fuel delivery systems. Temperature range: -60 to 350 degree F. New unleaded nozzles with three notch hold open clip.


Similar products

Husky 000350 3/4" Male NPTF x 3/4" Female NPTF Multi-Plane Swivel, 19mm Male x 19mm Female
Fill-Rite FRH07512 Hose with Static Wire and Internal Spring Guards, 3/4" x 12' Length
Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
Apache 99000233 3/4" Fuel Swivel
OPW 45-5060 Swivel MF, 3/4"
Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle
Husky 159403N-03 New X Light Duty Diesel Nozzle with Three Notch Hold Open Clip and Full Grip Guard
Apache 99000247 1" Green Auto Shut-Off Diesel Nozzle
Husky 696310N-03 New 1HS Heavy Duty Diesel Nozzle with 3-Notch Hold Open Clip and Metal Hand Guard
OPW 66REC-1000 Breakaway Reconnectable, 3/4"


8 oz - Camco 10324 Gas Leak Detector with Sprayer

Dries to touch within 30 minutes; thorough drying may take 24 to 48 hours. Detector bubbles at the problem area when gas is escaping. Soft-set with PTFE. 1 year shelf life when stored at 40 degree F to 80 degree F. Spray it on gas lines; Gas Leak Detector bubbles at the problem area when gas is escaping. Non-hardening, opaque, non-toxic, dark green paste.

Not for use with oxygen. 8 ounce sprayer bottle. Use on all types of pipe. Automatic shut-off nozzle for full-service and self-service stations. Meets ul standards for use with ethanol blended gasoline. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends. Withstands temperatures from -100 degrees F to +600 degrees F -74 to +318 degrees C.

. Prevents gasoline spills in prepay or card lock systems utilizing OPW's unique No Pressure -No Flow Device. Stream shaper reduces turbulence for straighter fuel flow and less splashback spillage. Thickness is 3. 8 milli-inches. Tensile minimum PSI - 1600


Similar products

LA-CO 44094 Slic-Tite PTFE Gas Line Pipe Thread Tape, Premium Grade, [260" Length, 1/2" Wide], Yellow
Harvey 017065 Gas Line PTFE Thread Seal Tape
Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant
Combustible Gas Leak Detector, Natural Gas Adjustable Sound Light Alarm Tester Detect for Explosive Natural Gas Leakage Methane Propane LP Gas (Batteries Included)
Gasoila Yellow PTFE High Density Thred Tape Roll, -450 to 550 Degree F Performance Temperature, 3.8 mil Thick, 260" Length, 1/2" Width, For Gas
Homewerks VGV-1LH-T2B Premium Gas Ball Valve, Flare x Flare, Brass, 3/8-Inch
Pasco 1427 30-Pound Gas Test Gauge Assembly
DANCO Gas Test Gauge for 0-15 psi at 1/10 Increments, Chrome-Plated (94352)
Honeywell G64-030 Gas Test Gauge
Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant


Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose

We use only the most durable materials to insure long life and dependability. Density is 1. 3 - 1. 45 gram per cubic centimeter. Can be used on all metals and has excellent resistance to gasoline and ethanol blended gasoline. Test rv for propane gas leaks. Equipped with a unique flo-stop TM device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.

Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions. 8 ounce sprayer bottle. Withstands temperatures from -100 degrees F to +600 degrees F -74 to +318 degrees C. Unique two planes of rotation for easy nozzle positioning and hose life.

Pressure range: 10000 psi sealing liquids and 3000 PSI sealing gases. Seals up to 10, 000 psi for liquids and up to 3, 000 psi for gases. Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology. Seals and lubricates NPT pipe threads. Use on all types of pipe. Temperature range: -100 degree Fahrenheit to 800 degree Fahrenheit.




Similar products

Apache 99000233 3/4" Fuel Swivel
Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle
Goplus 3/4'' Automatic Fuel Nozzle Auto Shut Off Diesel Kerosene Biodiesel Fuel Refilling
Fill-Rite S075H1314 3/4" Multi-Plane Swivel
Fill-Rite FRH10020 1" x 20 ft. Fuel Transfer Hose
Apache 99000246 3/4" Red Auto Shut-Off Farm Fuel Nozzle
Goplus Electric Fuel Pump 12V 10GPM Diesel Bio Kerosene Oil Transfer Extractor
GOLDENROD (496-5) Fuel Tank Filter Replacement Water-Block Element
Self Prime 110v Ac 16gpm Oil Transfer Pump Fuel Diesel Kerosene Biodiesel Pumps
YaeTek 3/4" Male x 3/4" Female Multi-Plane Fuel Swivel, 19mm Male x 19mm Female


Gasoila PLS2 Premium Pipe Thread and Gasket Sealer, -100 to 600 Degree F, 1/4 Pint Brush

Pipe thread and gasket sealer. One year shelf life when stored at 40 degree Fahrenheit to 80 degree Fahrenheit. Gasoila 1/4 pint brush plS 2 Premium Pipe Thread and Gasket Sealer. Thickness is 3. 8 milli-inches. Unique two planes of rotation for easy nozzle positioning and hose life. Product is highly durable and very easy to use.

Lead-free, non-hardening, non-toxic, opaque gray paste. Temperature range: -100 to 600 degree F. For use with dilute acids, jet fuel, ammonia, chlorine, diesel fuel, hydraulic oils, petroleum solvents, mineral oils, LPG, kerosene, gasoline, dilute caustic alkali, butane, heating oils, natural gas, aliphatic solvents, refrigerants and steam.

Temperature range: -100 degree Fahrenheit to 800 degree Fahrenheit. Density is 1. 3 - 1. 45 gram per cubic centimeter. 1 year shelf life when stored at 40 degree F to 80 degree F. Pressure range: 10000 psi sealing liquids and 3000 PSI sealing gases. Prevents consumer from jamming the nozzle in an open position and Flow Lock allows nozzle to shut-off when falling out of vehicle and is tipped up, limiting spillage and unsafe conditions.

Adheres readily to iron, aluminum, monel, stainless steel, plastics and synthetic rubber compounds.


Similar products

Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
Gasoila Hard-Set Red Varnish Thread Sealant, -60 to 350 Degree F, 1/4 pint Can
Milrose 70886 Blue Monster 3/4 Inch x 1429 Inch MDPE Blue Teflon Tape (3 Pack)
Gasoila Yellow PTFE High Density Thred Tape Roll, -450 to 550 Degree F Performance Temperature, 3.8 mil Thick, 260" Length, 1/2" Width, For Gas
Gasoila E-Seal Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1/4 Pint Brush
Milrose 70885 Blue Monster 1/2 Inch x 1429 Inch Blue Teflon Tape (3 Pack)
Gasoila DE04 DEF Diesel Exhaust Thread Sealant, 1/4 Pint Brush
Homewerks VGV-1LH-B3B Premium Gas Ball Valve, Female Thread x Female Thread, Brass, 1/2-Inch
LA-CO 44094 Slic-Tite PTFE Gas Line Pipe Thread Tape, Premium Grade, [260" Length, 1/2" Wide], Yellow
Moeller Marine 035728-10, Gasket for Fuel Tank Sending Unit, 5 Hole, Electric and Mechanical


Husky 173310N-03 New VIII Heavy Duty Diesel Nozzle with Three Notch Hold Open Clip, Full Grip Guard and Green Hand Guard

Temperature range: -100 degree Fahrenheit to 800 degree Fahrenheit. 1 year shelf life when stored at 40 degree F to 80 degree F. Stream shaper reduces turbulence for straighter fuel flow and less splashback spillage. Easy to use - utilizing Accu-Stop to-the-penny Flow Control Technology. Spout is reinforced with thick aluminum bushing that retains spout spring and keeps spout from rounding-in.

Unique two planes of rotation for easy nozzle positioning and hose life. Pressure range: 10000 psi sealing liquids and 3000 PSI sealing gases. Husky corporation produces high-quality nozzles, swivels, Safe-T-Breaks and accessories for service station fuel delivery systems. 1808 waffle splash guard and spout Bushing features an automatic shut-off nozzle for truck stop and other high volume, full-services.

Equipped with a unique flo-Stop device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal. The husky 173310n-03 new viii heavy duty diesel nozzle with 3-Notch Hold Open Clip, Full Grip Guard, Green Hand Guard, No. The spout is reinforced with thick aluminum bushing that retains spout spring and keeps spout from rounding-in.

50 psi 3. 45 bar maximum pressure. Ul and ulc listed for use in gasoline, diesel, and up to 10% ethanol blends.


Similar products

Husky 000087 1" Male NPTF x 1" Female NPTF High-Flow Multi-Plane Swivel, 25.4mm Male x 25.4mm Female
Gasoila Soft-Set Pipe Thread Sealant with PTFE Paste, Non Toxic, -100 to 600 Degree F, 1 Pint Brush
Husky 696310N-03 New 1HS Heavy Duty Diesel Nozzle with 3-Notch Hold Open Clip and Metal Hand Guard
Fill-Rite FRH10020 1" x 20 ft. Fuel Transfer Hose
Husky 004860 1" Male x 1" Female Heavy Duty / High-Flow Swivel, 25.4mm Male x 25.4mm Female
Apache 99000233 3/4" Fuel Swivel
Apache 99000234 1" Fuel Swivel
Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle
Fill-Rite S075H1314 3/4" Multi-Plane Swivel
Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose