iBrightstar Newest Super Bright 3157 4157 3155 3457 Switchback LED Bulbs with Projector Replacement for Daytime Running Lights / DRL and Turn Signal Lights,White/Amber

Output Wattage: 3. 5w/bulb white, 4WAmber. Working voltage: 9-24V fit 12V, 24V vehicles. Color: White/Amber. Service life: up to 30, 000 Hours. Easy installation, plug and play. Application: light up xenon white for parking lights or daytime running lights, Light up Amber for turn signal lights. The turn signal flashes "amber-off-amber-off" instead of "amber-white-amber-white", which makes it easier to seeMost switchback bulb on the market flash amber-white-amber-white.

Advantage: more than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption. Notice: the 50w 6ohm load resistor or flasher relay might be needed to prevent the hyper flash, malfunction or trigger warning message on dashboard.

Ibrightstar led are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer defect. Warranty type: Exchange or replacement. High brightness led: 72smd 3014 & 4SMD 3030 chipset. Features dual function: light up Xenon White for parking lights or daytime running lights, Light up Amber for turn signal lights.

Warranty: ibrightstar Warranty for 1 year from date of purchase. Notice: for turn signal lights, you might need to add 50w 6-ohm load resistors or flash relay to prevent the LED bulbs from hyper flashing, since LED bulbs have lower wattage comparing with the stock bulbs, malfunction or trigger warning message on dashboard.

---

4Pcs Aaron 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code Resistors get very hot during working

Each led bulb installation requires one resistor connected in parellel see picture below for instruction. Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb. Solution for fast turn signal Blinking response after installing SMD LED light bulb. Load resistors heat up like light bulbs and get really HOT when working.

Those are 50W 6ohm resistors. Just connect the wires with the splice taps provided. Package include: 4pcs 2 pairs 50W 6 ohm Load resistors with 8Pcs T-Taps. Please do your research before purchase about what kind of load resistors you need for your car: 3ohm, 6ohm or 9ohm. Mount them on metal surface, NOT plastic.

Installation is easy. For long-wire version, please search item B00VCSRI4A.


Similar products

---

Corvette Envy C5 Corvette Hyper Flash Fix / Signal Fix / LED Bypass Hyper Flash Harness

Assembled from genuine GM Delphi parts and a custom made flasher. Solves problems with your OEM flasher. The tpas can only be inserted if each terminal is completely seated in the connector housing. Each led bulb installation requires one resistor connected in parellel see picture below for instruction. Instructions with Pictures Included.

Does not work with the euro taillight conversion **** fits all corvette C5s model year 1997-2004 **** Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb. Solution for fast turn signal Blinking response after installing SMD LED light bulb. Load resistors heat up like light bulbs and get really HOT when working.

Simple 20 minute plug N Play installation with a #15 Torx Driver. For long-wire version, please search item B00VCSRI4A. Solves hyper flashing / rapid flashing caused by LED Taillights or LED DRLs without using dangerously hot load resistors on each turn signal. This harness uses tpa terminal position Assurance equipped connectors just like the original GM Delphi connectors to ensure that each terminal has a "locked in", assured connection.

This will make sure that the terminals will not back out of the housing due to natural vibrations. Just connect the wires with the splice taps provided.


Similar products

---

JDM ASTAR 1200 Lumens Extremely Bright 144-EX Chipsets 3056 3156 3057 3157 LED Bulbs with Projector for Backup Reverse Lights, Xenon White

Solves hyper flashing / rapid flashing caused by LED Taillights or LED DRLs without using dangerously hot load resistors on each turn signal. Mount them on metal surface, NOT plastic. Installation is easy. Only used for backup reverse light. Assembled from genuine GM Delphi parts and a custom made flasher. Set of 2 bulbs144-pieces high power ex chipsets per bulb with projector.

Buy with confidence, we offer "ONE YEAR" warranty on items that confirm to be manufacturer defect. Color:6000k xenon white. Just connect the wires with the splice taps provided. Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb. Solution for fast turn signal Blinking response after installing SMD LED light bulb.

Load resistors heat up like light bulbs and get really HOT when working. For long-wire version, please search item B00VCSRI4A. Each led bulb installation requires one resistor connected in parellel see picture below for instruction. Solves problems with your OEM flasher. Instructions with Pictures Included.


Similar products

---

50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights Fix Hyper Flash, Warning Cancellor

Solves hyper flashing / rapid flashing caused by LED Taillights or LED DRLs without using dangerously hot load resistors on each turn signal. Instructions with Pictures Included. Each led bulb installation requires one resistor connected in parellel see picture below for instruction. One led resistor is required for each turn signal bulb or each license plate light bulb.

Simple 20 minute plug N Play installation with a #15 Torx Driver. Solves problems with your OEM flasher. Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb. Solution for fast turn signal Blinking response after installing SMD LED light bulb. Load resistors heat up like light bulbs and get really HOT when working.

Only used for backup reverse light. A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. Assembled from genuine GM Delphi parts and a custom made flasher.

Set of 2 bulbs144-pieces high power ex chipsets per bulb with projector. Buy with confidence, we offer "ONE YEAR" warranty on items that confirm to be manufacturer defect.


Similar products

---

Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code - iBrightstar 50W 6ohm Load Resistors

Ibrightstar is a registered brand with Amazon. Size:2. 25" long and 075" in diameter. Lighting output：2400 raw lumens, 1200 lumens for each bulb. Fits: 3156 3056 3356 3456 4156 3047 3157 3157a 3057 3155 3157na 3357 3457 3457a 4057 4114 4157 etc. Just connect the wires with the splice taps provided. 2pcs 50w 6ohm load resistors + 4pcs Quick wire Clip.

Prevent led turn signal lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard. Notice! load resistors heat up like light bulbs and get super HOT when working. Prevent led turn signal lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard.

Just connect the wires with the splice taps provided and no wire cutting is necessary. Working voltage 12v-24v. Assembled from genuine GM Delphi parts and a custom made flasher. Set of 2 bulbs144-pieces high power ex chipsets per bulb with projector. Buy with confidence, we offer "ONE YEAR" warranty on items that confirm to be manufacturer defect.

Color:6000k xenon white. Solves problems with your OEM flasher.


Similar products

---

4PCS ARTR 50W 6ohm Load Resistors - Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error CodeResistor gets very hot during working

Assembled from genuine GM Delphi parts and a custom made flasher. Set of 2 bulbs144-pieces high power ex chipsets per bulb with projector. Buy with confidence, we offer "ONE YEAR" warranty on items that confirm to be manufacturer defect. Color:6000k xenon white. Just connect the wires with the splice taps provided.

1 year warranty. Simple 20 minute plug N Play installation with a #15 Torx Driver. Solution for fast turn Signal Blinking response after installing LED light bulb. Led load resistor will not solve LED bulbs flashing issue, which mean the LED bulb is defective. Load resistors heat up like light bulbs and get really HOT when working.

. If the items will not work well for your car, please return them for a full refund or contact seller for help. Instructions with Pictures Included. Just connect the wires with the splice taps provided. Please do not leave bad reviews simply because the items are not compatible with your car. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

One led resistor is required for each turn signal bulb or each license plate light bulb.


Similar products

---

iBrightstar Newest 9-30V Super Bright Low Power 7440 7443 T20 LED Bulbs with Projector replacement for Turn Signal Lights or Brake Lights,Amber Yellow

Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip. Each led bulb installation requires one resistor connected in parellel see picture below for instruction.

This bulb is compatible for both CK/SRCK and standard socket with Non-polarity design. Size:2. 25" long and 075" in diameter. Lighting output：2400 raw lumens, 1200 lumens for each bulb. Fits: 3156 3056 3356 3456 4156 3047 3157 3157a 3057 3155 3157na 3357 3457 3457a 4057 4114 4157 etc. Easy installation, plug and play.

Application: turn signal lights, Tail Lights, brake lights, Side Marker Lights, corner lights, Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights. Advantage:compatible for both ck/srck and standard socket, non-polarity design.

300% brighter than original halogen bulb, full aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption. Note:ibrightstar led are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer defect.




Similar products

---

AUXITO 194 LED Light Bulb 6000K White Super Bright 168 2825 W5W T10 Wedge 24-SMD 3014 Chipsets LED Replacement Bulbs Error Free for Car Dome Map Door Courtesy License Plate Lights Pack of 10

Only used for backup reverse light. A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. Mount them on metal surface, NOT plastic.

Installation is easy. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights. Advantage:compatible for both ck/srck and standard socket, non-polarity design. 300% brighter than original halogen bulb, full aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.

Note:ibrightstar led are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer defect. Voltage:12v; color:6000k xenon white; power:2w/pc; lumen:240lm/pc; Dimensions:12*26mm; Net Weight:2g/PC. Just connect the wires with the splice taps provided and no wire cutting is necessary.

Solution for "bulb out signal" / "obc error message" after installing SMD LED light bulb. Each led bulb installation requires one resistor connected in parellel see picture below for instruction. Each bulb has twenty-four 3014 smd on it, no blind spot, 360 degree lighting angle, super bright brings your car a refreshed new look.




Similar products

---

iBrightstar Newest 9-30V Extremely Bright Low Power 168 175 194 2825 W5W T10 Wedge LED Bulbs with Projector for Side Marker Light,Xenon White

Mount them on metal surface, NOT plastic. Installation is easy. Warranty type: Exchange or replacement. Ibrightstar is a registered brand with Amazon. 2pcs 50w 6ohm load resistors + 4pcs Quick wire Clip. Prevent led turn signal lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard.

Notice! load resistors heat up like light bulbs and get super HOT when working. Working voltage 12v-24v. Each bulb has twenty-four 3014 smd on it, 360 degree lighting angle, no blind spot, super bright brings your car a refreshed new look. Fit bulb sizes: 168, 175, just plug and play. Canbus error free, 194, 2825, W5W, T10.

Easy to install, no error after installation. Wide application: the led bulbs can be used for license plate tag light, trunk cargo room lights, glove box lights, reading lights, turn signal lights, front/rear side marker lights, map lights, dome light, inner tail light bulb etc. Package includes 10pcs auxito led bulbs.

We offer 12 months warranty on items damaged during the shipping or confirmed to be a manufactory defect. Warranty: ibrightstar Warranty for 1 year from date of purchase. For long-wire version, please search item B00VCSRI4A.


Similar products

---

JDM ASTAR 2400 Lumens Extremely Bright 144-EX Chips H10 9140 9145 9050 9155 LED Fog Light Bulbs with Projector for DRL or Fog Lights, Xenon White H10/9140/9145

Easy installation, plug and play. Application: turn signal lights, corner lights, Side Marker Lights, Tail Lights, brake lights, Blinker Lights etc. Solves problems with your OEM flasher. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip. Select the jdm astar instead of others who list here not identical product by lowering prices only a little to take advantage of the reputation built by JDM ASTAR.

The counterfeit bulb doesn't even have driving IC and resistor. Fits:t10 t15 147 152 158 159 161 168 175 184 192 193 194 921 912 2825 2827 w5w w16w etc. Easy installation, plug and play. Application:side marker lights, corner lights, interior map lights, parking Lights, Dome Lights, Back Up Reverse Lights, Cargo Lights, License plate Lights, Trunk lights, reading light, City Lights, side door courtesy lights, Malibu Landscape Lights etc.

Advantage: non-polarity design, 300% brighter than original halogen bulb, aircraft grade aluminum heat sink with Low temperature, built in Constant Current IC for Longer life span & Wide Voltage & Low Power Consumption. Ibrightstar led are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer quality.

Set of 2 bulbs144-pieces high power ex chipsets per bulb with projector.


Similar products