Milescraft 4700 Turners Press for Joining Pens and Other Turned Projects of All Types

Micro adjustable pressure pad for fine tuned length adjustments. Exclusive flip-up support stanchions ensure easy setup and horizontal component assembly, eliminating splitting of delicate components. One or more can be quickly and easily flipped up under the mandrel, preventing it from bowing in any direction when pressure is applied during assembly.

The quick, easy way to accurately align and Assemble Pens and Other Turned Projects Proprietary design keeps parts in horizontal alignment while pressure is applied, preventing spliting and ensuring proper assembly. Spring loaded self-feeding mandrel holds objects in position during set up. The dual-sided, extra wide steel base provides a solid foundation, and allows for quick, easy clamping or permanent mounting to a work surface.

The pressure used on any one assembly is precisely calibrated using the fine threaded micro-adjustment pad. The turnerspress can be used to construct items measuring up to 5 long, including those with larger diameters, such as letter openers or shorter, such as pepper mills intricate pieces, stubby parts such as bottle stoppers.

Wide metal base sits in place or clamps/installs onto workbench. Steel handle and pivot delivers up to 300 pounds of force. The mandrel is spring-loaded, so it pushes stacked components against the pressure arm, holding them in alignment during set up. Six half-circle metal stanchions are located beneath the spring-loaded mandrel opposite the pressure arm.

---

Purple Heart, Zebrawood, Sapele, Walnut, Padauk - Pen Blank 10 Pack

This pack of pen blanks contains the following species: Purple Heart, Sapele, Zebrawood, Walnut, Padauk. Kiln Dried. Each blank is at least 3/4 squared by 5" long and has been kiln dried" Each piece measures 3/4" x 3/4" x 5".


Similar products

---

Non-Stick Pen Bushings for CA Finish

Using ca glue to finish your pen turnings results in a lustrous, glossy polish, but it can also fuse your pen blank to the bushings. Features: non-stick pen bushings are made of UHMW Ultra-High Molecular Weight polyethylene Pre-drilled for a standard 7mm mandrel e. G. Made of uhmw ultra-High Molecular Weight polyethylene.

. Just swap these for your metal bushings once the pen is turned, and apply your finish. They're pre-drilled for a standard mandrel, and have a 60° taper so they'll fit most any size pen bushing. All rockler products come in Rockler branded packaging. Kiln Dried. 4-pack. Product received in generic packaging should be reported to Amazon as a knockoff.

These bushings are made from UHMW, the same super-slippery polymer used in our Plastic Jig Stock. Not so with these non-stick polyethylene bushings in place, however. 43537, sold separately 60° cone-shaped taper fits any size pen bushing after shaping the pen blank, replace the metal bushings with non-stick plastic bushings and apply your CA finish Self-lubricating UHMW has a low coefficient of friction, so it sheds glue easily Very stable - 10x heavier than regular high-density polyethylene High abrasion resistance and high impact strength even at low temperatures Resistant to chemicals Each piece measures 3/4" x 3/4" x 5".

Pre-drilled for a standard 7mm mandrel.


Similar products

---

PEN VISE BY PEACHTREE WOODWORKING PW7003

It measures approximately 2" by 1/4". The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. There is no need to change the setup regardless of the blanks size or shape. Holds blanks up to 1-1/2" square. Holds blanks up to 1-1/2" square. Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise.

By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens. The pen center vise includes a scrap board piece of mdf. When you use up all of the surface, simply cut another piece out of 1/4" thick stock. When you use up all of the surface, simply cut another piece out of 1/4" thick stock.

It measures approximately 2" by 1/4". The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. Product received in generic packaging should be reported to Amazon as a knockoff. Made of uhmw ultra-High Molecular Weight polyethylene. The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise.

Easily locate and drill pen blank centers and drill through the exact center of your pen blanks with this simple but effective Pen Centering vise.


Similar products

---

Micro-Mesh 2" Assortment Pack - 18 Pieces

Assortment pack contain 2 each: soft touch micro mesh pad 1500 grit soft touch micro mesh pad 1800 grit soft touch micro mesh pad 2400 grit soft touch micro mesh pad 3200 grit Soft Touch Micro Mesh Pad 3600 grit Soft Touch Micro Mesh Pad 4000 grit Soft Touch Micro Mesh Pad 6000 grit Soft Touch Micro Mesh Pad 8000 grit Soft Touch Micro Mesh Pad 12000 grit Each piece measures 3/4" x 3/4" x 5".

It measures approximately 2" by 1/4". The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. Kiln Dried. Pre-drilled for a standard 7mm mandrel. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens. The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise.

Just set up the vise once and drill all of your blanks in the exact center. Easily locate and drill pen blank centers and drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. Ranging from 1500 to 12, 000 grit. Product received in generic packaging should be reported to Amazon as a knockoff.

The pen center vise includes a scrap board piece of mdf. When you use up all of the surface, simply cut another piece out of 1/4" thick stock.


Similar products

---

Legacy Woodturning, Pen Bushings, for Slimline Style Pens, Colors Vary

When you use up all of the surface, simply cut another piece out of 1/4" thick stock. 18 color coded foam backed abrasive pads - 2 each grit. Set of bushings used to make Legacy Slimline and Fancy Pens on a woodturning lathe. Kiln Dried. These bushings are for use with Legacy Pen Kits but will fit other kits from other manufacturers.

Easily locate and drill pen blank centers and drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. Each piece measures 3/4" x 3/4" x 5". Works great on surfaces that include stabilized woods, acrylics and solid surface materials. Remarkable hi-gloss, scratch free shine.

The pen center vise includes a scrap board piece of mdf. You should match the bushing to the type of pen/pencil style that you are making. The perfect match for "Legacy Woodturning" brand kits, sold separately. It measures approximately 2" by 1/4". The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece.

See the additional photos for bushing dimensions nominal. Select above from more than 25 different bushings.


Similar products

---

PSI Woodworking Products PKMSTS2 2 MT Live Mandrel Saver

It measures approximately 2" by 1/4". The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. Will work with all mandrels with a diameter of 0245-inch or less. There is no longer a need for spacer bushings. Will work with all mandrels with a diameter of 0245-inch or less.

Kiln Dried. Select above from more than 25 different bushings. The pen center vise includes a scrap board piece of mdf. Are you tired of bending your mandrel and ruining the point on your live center? If so, then this fail-safe live center accessory is for you. All rockler products come in Rockler branded packaging.

Provides no pressure on the mandrel thus eliminating any bending and vibration. Product received in generic packaging should be reported to Amazon as a knockoff. There is no longer a need for spacer bushings. Unique design to support the end of your mandrel. The live center is now obsolete. Great for beginners and students.

Easily locate and drill pen blank centers and drill through the exact center of your pen blanks with this simple but effective Pen Centering vise.


Similar products

---

HUT Crystal Coat

Ranging from 1500 to 12, 000 grit. Provides no pressure on the mandrel thus eliminating any bending and vibration. Select above from more than 25 different bushings. Set of bushings used to make Legacy Slimline and Fancy Pens on a woodturning lathe. There is no need to change the setup regardless of the blanks size or shape.

Holds blanks up to 1-1/2" square. Pre-drilled for a standard 7mm mandrel. Kiln Dried. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens. The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise.

Just set up the vise once and drill all of your blanks in the exact center. Product received in generic packaging should be reported to Amazon as a knockoff. Unique design to support the end of your mandrel. It measures approximately 2" by 1/4". The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece.

The live center is now obsolete. All rockler products come in Rockler branded packaging.


Similar products

---

Slimline Pen Kit 10-Pack, Mix

Set of bushings used to make Legacy Slimline and Fancy Pens on a woodturning lathe. Works great on surfaces that include stabilized woods, acrylics and solid surface materials. Remarkable hi-gloss, scratch free shine. Ranging from 1500 to 12, 000 grit. There is no need to change the setup regardless of the blanks size or shape.

Holds blanks up to 1-1/2" square. It measures approximately 2" by 1/4". The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. Requires 7mm drill bit. The pen center vise includes a scrap board piece of mdf. To be used with a 7mm Woodturning Mandrel. The perfect match for "Legacy Woodturning" brand kits, sold separately.

Provides no pressure on the mandrel thus eliminating any bending and vibration. There is no longer a need for spacer bushings. See the additional photos for bushing dimensions nominal. When you use up all of the surface, simply cut another piece out of 1/4" thick stock. 18 color coded foam backed abrasive pads - 2 each grit.

Unique design to support the end of your mandrel.


Similar products

---

Woodturner ins Multi-Roll Sanding Pack

To be used with a 7mm Woodturning Mandrel. Pen blanks not included. Ranging from 1500 to 12, 000 grit. Each piece measures 3/4" x 3/4" x 5". By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens. The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise.

Just set up the vise once and drill all of your blanks in the exact center. Set of bushings used to make Legacy Slimline and Fancy Pens on a woodturning lathe. Ballpoint twist pen with a slim, comfortable design. Includes five rolls of J-weight, cloth-backed sandpaper. The pen center vise includes a scrap board piece of mdf.

Requires 7mm drill bit. It measures approximately 2" by 1/4". The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. Made of uhmw ultra-High Molecular Weight polyethylene. Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks. All rockler products come in Rockler branded packaging.




Similar products

---

Legacy Woodturning, Pen Mill / Barrel Trimmer For Pen Kits, Choose your Size

Includes 7mm pilot shaft and 3/4" Steel Cutter. Select above from more than 25 different bushings. To be used with a 7mm Woodturning Mandrel. Product received in generic packaging should be reported to Amazon as a knockoff. For pens using 7mm tubes. Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks. Pen blanks not included.

. When you use up all of the surface, simply cut another piece out of 1/4" thick stock. 18 color coded foam backed abrasive pads - 2 each grit. All rockler products come in Rockler branded packaging. Works great on surfaces that include stabilized woods, acrylics and solid surface materials. Remarkable hi-gloss, scratch free shine.

See the additional photos for bushing dimensions nominal. Provides no pressure on the mandrel thus eliminating any bending and vibration. Includes 7mm pilot shaft and 3/4" Steel Cutter with hex key. Use for necessary pen kit projects. The perfect match for "Legacy Woodturning" brand kits, sold separately. The pen center vise includes a scrap board piece of mdf.




Similar products