Top 10 Boat Drain Plug – Boat Plumbing Fittings

As an Amazon Associate I earn from qualifying purchases.

1. attwood

#ad

Attwood 7524A7 Snap-Handle Drain Plug, Rubber Plug, Locks in Place, Brass Handle, For 1-Inch-Diameter Drains

#adattwood #ad - Insert drain plug into drain opening and turn the handle clockwise to tighten it in place. Handle snaps down to lock plug in place. Fitting 1-inch inside diameter drain openings. Lift handle to unlock and turn the handle counter-clockwise for easy removal. Easily and reliably plugs drains on board.

Brand	attwood #ad
Manufacturer	Attwood #ad
Height	4.87 Inches
Length	1.25 Inches
Weight	0.12 Pounds
Width	1.87 Inches
Part Number	7524A7
Model	7524A7
Warranty	Not applicable.

2. attwood

#ad

Attwood 7526A7 T-Handle Drain Plug, Brass Handle, Locks in Place, For 1-Inch-Diameter Drains, Rubber Plug

#adattwood #ad - Non-corrosive Brass. Turn the handle counter-clockwise to unlock it for easy removal. The drain plug fits a 1" diameter drain.

Brand	attwood #ad
Manufacturer	Attwood #ad
Height	4.87 Inches
Length	1.25 Inches
Weight	0.1 Pounds
Width	1.87 Inches
Part Number	7526A7
Model	7526A7

3. attwood

#ad

Brass-Plated Handle with Chain, for 1-Inch-Diameter Drains, Locks in Place, Attwood 11587-4 T-Handle Drain Plug

#adattwood #ad - Plug features durable rubber construction. Insert drain plug into drain opening and turn the T-Handle clockwise to lock it in place. Handle is brass-plated and includes a chain. Easily and reliably plugs drains on board. For use in 1-inch-diameter drain openings. Turn the handle counter-clockwise to unlock it for easy removal.

Brand	attwood #ad
Manufacturer	Attwood #ad
Part Number	11587-4
Model	11587-4

4. Spurick

#ad

1/2" NPT Solid Brass Drain Plugs commonly Used in Boat Hulls, 2 Pack Solid Brass Boat Hull Spare Garboard Drain Plug for Bayliner Four Winns Glastron Larson Sea Ray Starcraft and Many Other Models

#adSpurick #ad - High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip. Precision thread and solid brass, more durable, and low magnetic permeability, ductility at high temperatures, not hollow like many poor quality plugs that rot and sink boats.

Cast brass pipe plug, 1/2" npt solid brass drain plugs. It can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections. This item for sale is a brand new 2-pack of 1/2" npt solid brass Drain Plugs commonly used in boat hulls.

Check the size of your transom hole. Used on most boats such as: bayliner, Glastron, larson, Four Winns, Sea Ray, Starcraft And many other models. Unique design achieves very good waterproof sealing performance. It fits a standard transom drain hole. These are made to stopper drain holes on boat transoms.

Brand	Spurick #ad
Manufacturer	Spurick Parts #ad

5. SeaSense

#ad

1- Inch, Unified Marine 50032292 Snap Drain Plug Brass

#adSeaSense #ad - Package quantity: 1. Package length: 12. 192 cm. Package width: 4. 826 cm. Package height: 2. 54 cm.

Brand	SeaSense #ad
Manufacturer	3M #ad
Height	2 Inches
Length	6 Inches
Weight	0.84 Pounds
Width	3 Inches
Part Number	50032292
Model	50032292
Warranty	One year warranty.

6. T. H. Marine

#ad

Black, T-H Marine DP-1-DP Self-Retaining Boat Transom Drain Plug

#adT. H. Marine #ad - Back side of mounting flange has a groove to hold sealant for positive water proof mounting. Features an chemically inert "O" ring for positive sealing. Screw-type drain plug. Mounts in a 1" diameter hole with two countersunk stainless steel screws.

Brand	T. H. Marine #ad
Manufacturer	T-H MARINE SUPPLIES LLC-HUNTSVILLE #ad
Height	4 Inches
Length	8 Inches
Weight	0.04 Pounds
Width	6 Inches
Part Number	DP-1-DP
Model	3001.5678
Warranty	Limited manufacturer.

7. Milky Ocean

#ad

Milky Ocean-Stainless Steel T-Handle Drain Plug, Boat Plug 2 PCS, Twist and Seal Design, for 1"25.4mm Drains, Rubber Plug

#adMilky Ocean #ad - Easy and quick to use, more spare parts are recommended under normal wear and tear. Marine grade stainless steel for durability, rubber plugs are neatly cut without burrs. Turn the t-handle clockwise to twist the rubber and lock it in the hole, counter-clockwise to facilitate removal. For 1"25. 4mm drain or drain hole on boat transom, ice chest cooler, livewell, water-filled lawn roller or any container should have a plug that can be quickly sealed and removed.

Brand	Milky Ocean #ad
Manufacturer	Milky Ocean #ad
Height	0.9 Inches
Length	1.1 Inches
Weight	0.08 Pounds
Width	2.3 Inches

8. SeaSense

#ad

SeaSense Stainless Steel Drain Twist Plug 1- Inch

#adSeaSense #ad - 1" diameter. Twist plug. Tightens in place with a clockwise rotation of the "T" handle. Made of corrosion resistant stainless steel.

Brand	SeaSense #ad
Manufacturer	3M #ad
Height	3 Inches
Length	1 Inches
Weight	0.72 Pounds
Width	2 Inches
Part Number	50032172
Model	50032172
Warranty	One year warranty.

9. SEACHOICE

#ad

Seachoice Cast Bronze Marine Boat 2 In. Garboard Drain w/ Brass Plug

#adSEACHOICE #ad - Cast bronze garboard drain with brass plug allows bilge to drain when a vessel is hauled out of the water. Manufacturer part number 50-18751. Protective clear package for easy visibility and application. 2 inch outside diameter. Mounts with #8 fasteners. Fits ½ inch pipe.

Brand	SEACHOICE #ad
Manufacturer	Seachoice #ad
Height	5 Inches
Length	11 Inches
Weight	0.25 Pounds
Width	5 Inches
Part Number	50-18751
Model	18751
Warranty	Http://www. Seachoice. Com/warranty-information.

10. SeaSense

#ad

SeaSense Garboard Plug, GOLD

#adSeaSense #ad - Package height: 0254 cm. Product type: fishing eQUIPMENT. Package width: 3. 556 cm. Package length: 11. 43 cm.

Brand	SeaSense #ad
Manufacturer	3M #ad
Weight	0.86 Pounds
Part Number	50032272
Model	50032272
Warranty	One year warranty.