As an Amazon Associate I earn from qualifying purchases.

Most part of the kit is made of environmental PLA material, should be protected from heating, direct sunlight area or other high temperature environments to avoid deformation because of PLA material's low melting point.


This product is only for stryfe/rapidstrike cs-18 blaster toy, and the product included small parts, and need to match Worker mod Model W0205/W0211 Oblique Flywheel Chamber and large power motor, you need to install and assemble your blaster, All parts are separate, Please be careful installing the parts to avoid damage to your Blaster!.


Made of high quality metal, electronic components and a durable PLA. The speed of push rod can be adjusted and the speed of shoot can be changed.


The motor power supply is lithium battery, the input voltage is 11. 8v. Flywheel update kits includes - 1 x oblique flywheel cage; 1 x set of 132 motor Circular Shaft ; 2 x Diamond Pattern Flywheels; 1 x Set of plastic aluminum tube.
Function - unique diamond-pattern effectively increase the friction between bullet and flywheel to reduce the degradation of energy and advance the speed of shootting out. Apply- suitable for electric repeating blaster refitting, especially perfect for modified nerf n-strike elite stryfe, nerf CS-18 n-strike elite rapidstrike and nerf rebelle rapid red.


1. JGCWorker
#ad
JGCWorker Modulus Attachment Toy Vector Style Mod Kit for Nerf Stryfe
#adJGCWorker #ad - This mod kit deliver the ultimate in blaster appearance. It is recommended for people over 14 years old to use it. The surface is frosted, non slip and non reflective, to ensure that you will not be found by your opponents in the dark.More information #ad
All the required screws have been prepared. It is made of high-quality ABS injection molding, durable and precise. You need to prepare the screwdriver yourself. It can be used after simple installation. Blaster not Included!.Brand | JGCWorker #ad |
Manufacturer | Worker #ad |
Part Number | 3A-22 |
More information #ad
2. JGCWorker
#ad
JGCWorker Mod MCX D Style Kit for Nerf N-Strike Retaliator FCZ-W011
#adJGCWorker #ad - Please contact us if you have any question. The product is suitabl for the crowd over 14 years old. Only mod kits for nerf reliator. Blaster not included! Decoration, It makes your toy look cooler.Most part of the kit is made of environmental PLA material, should be protected from heating, direct sunlight area or other high temperature environments to avoid deformation because of PLA material's low melting point.
More information #ad
The connect part of shoulder stock and side patch are made from ABS material, straight line pipe is made from PC, the material of front decorative cap is aluminum alloy; all other parts are made from PLA. Perfect Christmas and birthday gift for kids.Brand | JGCWorker #ad |
Manufacturer | JGCWorker #ad |
Part Number | FCZ |
Model | FCZ |
More information #ad
3. JGCWorker
#ad
JGCWorker Short Dart Talon Magazine Mod Kit Set for Nerf Stryfe and Worker Swordfish Dominator
#adJGCWorker #ad - Can take off the talon when you need to shoot Nerf elite darts. It’s best to work with Twill Rose Gold Metal Flywheel Kit Set. Very convenient.More information #ad
Change your Toy guns into short darts model. The launch is smoother and the accuracy of the Nerf short darts is better. Compatible with Nerf Stryfe and Worker Swordfish Dominator.Brand | JGCWorker #ad |
Manufacturer | Worker #ad |
Part Number | W |
Model | W |
More information #ad
4. WORKER
#ad
WORKER Mod 2PCS Accurate Type Aluminum Alloy Flywheels Modification Kits for Nerf N-Strike Elite Stryfe/Rapidstrike CS-18 Color Blue
#adWORKER #ad - Model:w0203accurate Type Aluminum Alloy Flywheel-Blue. Package included: 2 x Flywheel. Compatible with worker mod oblique flywheel chamber, includes Model:W0205 Oblique Flywheel Chamber-Blue, W0211 Oblique Flywheel Chamber-Rose Red for Nerf N-Strike Elite HyperFire.This product is only for stryfe/rapidstrike cs-18 blaster toy, and the product included small parts, and need to match Worker mod Model W0205/W0211 Oblique Flywheel Chamber and large power motor, you need to install and assemble your blaster, All parts are separate, Please be careful installing the parts to avoid damage to your Blaster!.
More information #ad
Worker mod flywheels can promote shooting range and dart speed.Brand | WORKER #ad |
Manufacturer | Worker #ad |
Part Number | WORW0203 |
Model | WORW0203 |
More information #ad
5. JGCWorker
#ad
JGCWorker Cheetah II Short Darts Stefan Blaster Mod Kit for Nerf Modify Toy
#adJGCWorker #ad - Suitable for people over 14 years old, because the installation of this product requires some disassembly capacity. Compatible with short darts system and talon magazine.More information #ad
This 2. 0 cheetah made by precision PC plastic molding with strong and clear body. It is a small model with big energy, power and speed. The cheetah compatible with 15 rounds of narrow magazines and a telescopic front tube for easy and quick shooting.Brand | JGCWorker #ad |
Manufacturer | JGCWorker #ad |
Part Number | W0548 |
Model | W0548 |
More information #ad
6. WORKER
#ad
WORKER Full Automatic 130 Motor Kits for Nerf N-Strike Elite Stryfe Modify
#adWORKER #ad - It can be matched with w0206 flywheel canted cage motor update kits for nerf stryfe/rapidstrike Toy Color Orange or W0315 Flywheel Update Kits for Nerf STRYFE/Rapidstrike CS-18 Toy Color Rose Gold, the test effect of these two flywheel sets is better.Made of high quality metal, electronic components and a durable PLA. The speed of push rod can be adjusted and the speed of shoot can be changed.
More information #ad
Stryfe can be semi-automatic and fully automatic mode control, can bring more fun for players. Blaster not included! Please notice this kits need some installation skills, so it is generally not suitable for people under 14 years of age. All the parts are separate and you need to reassemble them. Compatible with Nerf N-Strike Elite Stryfe.Brand | WORKER #ad |
Manufacturer | WORKER #ad |
Part Number | W0321 |
Model | W0321 |
More information #ad
7. WORKER
#ad
WORKER F10555 3D Printing No.55 Bottom Rail Mount for Stryfe
#adWORKER #ad - 4. Suitable for people over 14 years old, because the installation of this product requires some disassembly capacity. 2. Function: decoration, It makes your toy blaster look cooler.More information #ad
1. Compatible with Ne-rf Stryfe. 5. Blaster not included!3. Please note: because the melting point of 3D printed PLA material is very low, please pay attention not to put the product in high temperature environment to avoid product deformation.Brand | WORKER #ad |
Manufacturer | Worker #ad |
Part Number | F0139 |
More information #ad
8. YAMIX WORKER
#ad
Blue, YAMIX WORKER Modified Flywheel Update Kits for nerf n-Strike Elite stryfe/rapidstrike CS-18/Infinus Diamond Pattern
#adYAMIX WORKER #ad - Also suitable for Nerf N-Strike Elite Infinus. Advise - the set is partial to balanced type and the accuracy is better, suitable for junior and intermediate players. Feature - oblique flywheel cage design provides higher precision.The motor power supply is lithium battery, the input voltage is 11. 8v. Flywheel update kits includes - 1 x oblique flywheel cage; 1 x set of 132 motor Circular Shaft ; 2 x Diamond Pattern Flywheels; 1 x Set of plastic aluminum tube.
More information #ad
High-end modified parts set make your shooting fast, accurately and powerfully, which provides best game experience. Function - unique diamond-pattern effectively increase the friction between bullet and flywheel to reduce the degradation of energy and advance the speed of shootting out. Apply- suitable for electric repeating blaster refitting, especially perfect for modified nerf n-strike elite stryfe, nerf CS-18 n-strike elite rapidstrike and nerf rebelle rapid red.
Brand | YAMIX WORKER #ad |
Manufacturer | YAMIX WORKER #ad |
Height | 1.77 Inches |
Length | 3.03 Inches |
Weight | 0.35 Pounds |
Width | 0.83 Inches |
Part Number | ID165003HJ10U367 |
More information #ad
9. WORKER
#ad
Worker Kriss Vector Imitation ABS Kit for Nerf STRYFE Modify Toy Color Blue Transparent
#adWORKER #ad - 2. Function:decoration. 100% brand new and high quality. 4. Currently there are 3 colors to choose, This product is only for nerf Stryfe, do not for any other blaster.More information #ad
3. Best nerf modifiy parts for nerf stryfe, It makes your blaster look cooler. 1. Compatible with Nerf Stryfe blaster. 5. Blaster not included! .Brand | WORKER #ad |
Manufacturer | Worker #ad |
Part Number | JGCWorker-681973 |
More information #ad
10. Worker4Nerf
#ad
Worker MP5-K Mod Kit for Stryfe Blaster
#adWorker4Nerf #ad - Nerf mod kit for nerf Stryfe Blaster modded after MP5-K. Large magazine for extended play. Lightweight design and grip to help hold for stable shots. Assembly required.More information #ad
Brand | Worker4Nerf #ad |
Manufacturer | WORKER #ad |
Part Number | STF-W008-A MP5-K |
More information #ad